Can anybody help me for the configuration of somes switch on the FCB 1010 connect to midi on the POD Xt?
-The cable is good connect to each pedals
-I can and have understand how to do (i think lol) to config each switch.
But i have a problem or i don't understand for the Pedals (volume and wah)
-The switch 1.2.3and 4 is dedicated for the channel 1a.1b.1c.1d of the POD (that's ok)
-The switch 5 is dedicated for The Stomp so when i push on it it actived the stomp and i need to push one of the 22.214.171.124 to set the stomp OFF
EG: i play on switch2>push the stomp ON switch5 and come back on 2 to set the stomp OFF) (that's ok)
on switch 6 i have the "MOD" same function as "stomp"
On 7 i have the "DELAY" same function as "stomp and mod"
Now the question:
How can i set the switch 8 for the "COMP"??
The switch 9 to listed the "cabs"??
The switch 10 for the "TUNER"??
Actived the "Wah" on pedal 1 and also use de wah on it!???
The pedal 2 is OK and is dedicated for the Volume!!
Also another problem is when i set the Wah on pedal 1 it do just on and off when i use the pedals ansd NOT really the effect of the Wah!
I saw a guy explain in chinees but on a Pod 2.0
And he explain for using the wah you need to activated it with switch 8 and then using the pedal.But i can NOT configure it
And do i need to change the pedal assignation of the pod???
I use GearBox to
Thank you to help!
I update my questions because i find a lot on the fcb 1010
Is it possible to make the stomp on and off on the same switch?
Is it possible to add the tuner?
Is it possible to add to wah but immediately on the pedal because:
I find how to add the wah but the wah need to be always on and at the minimal,but i can hear the wah because it's ON
and i need to activate the switch to use the wah with the pedal
OMG it's a nice thing but complicated!!lool
Ya....I've got one of those and never could figure it out. I've attempted to read the manual but to me it's like guitar theory and puts me to sleep in about 10 seconds. I wish I could help ya brother. Mine is like brand new. I've got a Pod X3 and a FBV MKII and I can't figure out how to make it work either so....I'm guitarded.
Yeah i have the MKII express to,but really the fcb1010 it's better
You can do what you want (if you learn about,and know how working)
I increased the manipulation! and i understand a lot now but
I don't know how to put the tuner goddamn!!
I saw on internet about th eurekaprom (chip) to make it working better) but momentaly not interresting
now i gonna try to set a on/off for the wah on each pedal eg:
pedal one on/off the wah and pedal 2 using the wah
But if anybody know (the midi code) for the tuner ,i take it
But after a lot of day's i understand it now
And it's great to pilot a POD XT
on switch 1-2-3-4 ,I set the channels eg:1A-1B-1C-1D
on switch 6-Delay ON
on Switch 7-Stomp ON
ON switch 8- Mod ON
Switch 9- Reverb ON
switch 10- EQ on
to put it OFF just come back to the channel!!
channel 1-2-3-4 the same as above
switch 6 delay on -switch 7 delay off
switch 8 Mod ON- switch 9 Mod OFF
switch 10 Stomp on- switch 5 Stomp OFF
It's working great!!
Also can set whatever on the pedals
Most Users Ever Online: 307
Currently Browsing this Page:
The Tone King: 1070
The Grin: 462
Guest Posters: 2
Newest Members: DMichaelJohnson, vaultpress, battbren, Weaver, ediatedann, skiflezghimoise
Administrators: admin: 129